+41 32 732 15 20 | This email address is being protected from spambots. You need JavaScript enabled to view it. | Shop (Digi-Key) | Login

OPTICAL MEMS SWITCHES SXNT/SXLT

The Sercalo SX series are miniature opto-mechanical switches for fiber optic communication systems and submodules. The switch is available in latching or non-latching variants, with 1x1, 2x1, 2x2. The switch offers the smallest size, ease of integration and the established solid state reliability of Sercalo’s MEMS components.

The package is one of the smallest in the industry. It is optimized for low-cost production while maintaining high reliability comparable to a solid state device. The component is designed to meet Telcordia 1221 quality standards.

#FEATURESAPPLICATIONS
1 23 x 10 x 6 mm size Protection Switching
2 Low Cost Reconfiguration
3 TTL or CMOS logic Optical Subsystems
4 Latching Array integration
5 2x2, 2x1, 1x1 variants  
6 Single or multimode fiber  

 

+OPTICAL MINI SIZES SWITCHES SXLT2x2-9N
+OPTICAL MINI SIZES SWITCHES SXNT
+OPTICAL MINI SIZES SWITCHES SXLT2x2-9N
+OPTICAL MEMS MINI SIZES SWITCHES SXNT

INFORMATION REQUEST

The product you are looking for is not on this list? Do you have a special requirement for any of our optical MEMS components? Do not hesitate, get in touch with us !

All fields marked with * are required.

Powered by BreezingForms
OVERVIEW

OVERVIEW

In the Sercalo SX switches, the optical switching function is realized by a silicon MEMS chip, on which a mirror can be moved in and out of the optical path by electrostatic actuation. The miniature SX switch is only available in its latching variant, where a bistable suspension mechanism keeps the last selected state in power off.

To operate the switch, 5V and 0V are applied on pins 1 and 2, which are used by the internal DC-DC converter to supply a high voltage for the actuator control. CMOS or TTL logic levels on pins 3-4 control the electrostatic actuator.

To set the switch state in the latching variant, pin 3 respectively pin 4 are set to logic high (5V) for 20 ms and the corresponding switch state is selected. At rest pins 3 and 4 should be pulled to 0 V and must not be floating.

#FEATURESAPPLICATIONS
1 23 x 10 x 6 mm size Protection Switching
2 Low Cost Reconfiguration
3 TTL or CMOS logic Optical Subsystems
4 Latching Array integration
5 2x2, 2x1, 1x1 variants Instrumentation Measurement
6 Single or multimode fiber Medical

Description SXLT SXNT switches
sxnt 9b dsc 2771