(miniature Variable Optical Attenuator, coaxial design)

The mVOA comes in a hermetically sealed package with a diameter of only 3.5 mm. It's manufactured with the latest techniques in laser welding for achieving better stability and improved reliability.

This ultra small VOA is ideally suited for gain control in amplifiers and transceivers.


  • 3.5 mm diameter
  • Laser welded package
  • Reliable
  • 0-6.5 V
  • ROHS compliant


  • Telecom
  • Instrumentation
  • Test and measurement

All fields marked with * are required.

Powered by BreezingForms



Sercalo's fiber optic Variable Optical Attenuator is based on an electrostatic MEMS mirror. A voltage between 0-6.5 V on the drive pin sets the optical attenuation. When power is removed the VOA returns into its default state.

There are 2 variants available with different default states: The normally open (bright) type or high attenuation (dark) type. The dark variant has better linearity and is used in applications where the light is cut at power off.

The MEMS component is hermetically sealed. The part is designed to conform to Telcordia 1221 reliability standards. No epoxy is present in the optical path. The optical collimator is assembled using laser welding techniques which results in long term stability and excellent reliability. The component withstands rugged environments. It can directly be mounted on printed circuit boards. The component is compliant to ROHS requirements 2015/863/EU.

Sercalo’s COAXIAL TYPE VOA is non latching and returns to the default position at power-off, i.e. the bright variant returns to the minimum insertion loss position, whereas the dark variant returns to the high attenuation state (I.e it is blocking the light at power off). The VOA works over the wavelength range of the fiber, but wavelength dependent loss is specified within one single band (50 nm).

The VOA is also available for specialty fiber at 650, 750, 850 and 980 nm. Also variants with Polarisation Maintaining fibers are available.

I agree with the Privacy policy

sercalo logoSercalo is a leading supplier for MOEMS components. Our know-how covers the process from MEMS fabrication to assembly. 

Sercalo Microtechnology Ltd.
  Rue des Draizes 5,
     CH 2000 Neuchâtel
  + 41 32 732 15 20
  + 41 32 732 15 29