MAIN LINE LATCHING
The SL series are fast, latching MEMS switches. They maintain the last switching state after power is removed. They are available in configurations 1x2, 2x2, 1x4 and 1x8 with a variety of driver options and a capacitive position sensor. The SL switches are the best choice where highest reliability and self test capability are required.
• 0.5 dB insertion loss
• 0.5 ms response time
• low PDL
• 60 dB crosstalk
• miniature size
• Protection Switching
Purchase MEMS Switches
Thank you for trusting Sercalo's products.
By clicking "Buy Now", you will be redirected to a partner online sales site.
For any further question, please contact us using the following template.
Information request MEMS Switches
The SL series are opto-mechanical latching switches for the most demanding applications in fiber optic communication networks. The switch is available in 1x1, 2x1 and 2x2 variants and offers solid state reliability, accurate precision and fast response time. The switch mechanism is latching and has a very fast response time below 0.5 ms and only 0.5 dB insertion loss. The miniature package withstands rugged environments and is well suited for direct mounting on printed circuit boards. The switch is qualified according to Telcordia GR 1221.
The switches are powered by a voltage between 4.0-5.25 V on the supply pin. The switch state is selected with a CMOS or TTL signal on the selector pins. A high pulse during at least 2 ms on one of the selector pins toggles the switch into either cross state or bar state. At 0 V on the selector pins or at power off, the switch remains in the last selected state. The switching mechanism offers the reliability of a solid state device; it neither wears out nor degrades over time. Even after billions of cycles the switching quality stays constant.